With the country's transformation of the ship's shore power project, all ships must have a winch that can be connected to the shore-based power supply, which has also brought a large wave of orders to the winch industry. As an indispensable rotating transmission component in the cable winch, the conductive slip ring has also received a large number of orders. However, since the shore power winch in the shore power transformation is used on the ship, this makes the matching conductive slip ring also have a positive design, so that it can be used normally on the ship. At present, Jiachi conductive slip rings have specially developed conductive slip rings for shore power winches for the transformation of national shore power projects. This series of conductive slip rings has been adopted by a wide range of winch manufacturers, and is widely used in shore power above the winch. However, the conductive slip ring is always a semi-consumable item. The conductive slip ring of the winch needs to be replaced in a certain period of time. Today, the editor of Jiachi conductive slip ring will tell you how the conductive slip ring of the shore power winch is. Follow up.
First of all, there are two installation methods for the conductive slip ring of the conventional shore power winch, one is called the built-in installation method of the conductive slip ring, and the other is called the external installation method of the conductive slip ring. The two installation methods can be understood literally. The built-in installation method is to install the conductive slip ring inside the shore power winch. This installation method can improve the protection of the conductive slip ring and reduce one of the shore power winches. The overall size, but the disadvantage of this installation method is that the installation and replacement of the conductive slip ring is more troublesome. The external installation method of the conductive slip ring is to install the conductive slip ring on the side of the shore power winch. The advantage of this installation method is that it is easy to install and accept orders, and it is also easy to replace the slip ring. The disadvantage is that the protection level requirements of the conductive slip ring are compared. high.
Next, let's talk about how to install the conductive slip ring on the shore power winch built in the conductive slip ring. Our JARCH conductive slip ring uses the stator flange installation method for the conductive slip ring used for shore power winches. When installing, we only need to directly install our conductive and slippery stator flange part from the inside of the winch directly on the side plate of the shore power winch, and finally connect the cable of the conductive slip ring to the cable of the winch. That's it. The external and built-in installation methods of the conductive slip ring are the same. The easiest way is to pay attention to the installation method when removing the original slip ring.
In fact, whether it is a shore power slip ring or other types of conductive slip rings, the installation is very simple. If you have purchased a conductive slip ring and do not know how to install it, you can directly contact the editor of Jiachi conductive slip ring. Video guide for installation.
This article comes from: http://jiachijidian.cn7.iswweb.cn/ JARCH conductive slip ring Please indicate the source
