Professional slip ring manufacturer



English

Global Hotline

Info@szjarch.cn +86137-1425-1726





JSR-MPS12 Multi-channel Pneumatic Slip Ring



JSR-MPS12 Multi-channel Pneumatic Slip Ring

Product introduction: JSR-MPS12 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 12-in 12-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPS12 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

Passages(Gas): 12 Passages Port Size: M5-G1 Port/Optional Pipe Size:4-14mm Optional Passages(Gas+Electric )：1-128 Passages

download：

instructions 3D model

Skype

Info@szjarch.cn

Model Ordering Instructions

型号定购说明

Technical Specifications

技术规格参数

Technical Specifications
Rotary Joint Technical Parameters
Spec.		Data		Spec.	Data
Passages(Gas)		12-in,12-out		Pipe Size	Can be customized according to demand
Port Size		M5、G1/8''、G1/4''、G3/8''、G1/2'' Optional		Max. Operating Pressure	Positive Pressure 1Mpa(can be customized high pressure) , Vacuum - 0.01torr
Electrical Technical Parameters
Power			Signal
Spec.	Data		Spec.		Data
Voltage range	0-440VAC/VDC		Voltage range		0-440VAC/VDC
Insulation Resistance	≥1000MΩ/500VDC		Insulation Resistance		≥1000MΩ/500VDC
Lead wire spec.	AWG16# Tinned Teflon		Lead wire spec.		AWG22# Tinned Teflon
Rated current	Optional current for each channel
Electrical noise	10mΩ@6VDC,50mA,5Rpm
Dynamic resistance change	＜0.01Ω
Mechanical Data
Mechanical Performance			Environmental Performance
Spec.	Data		Spec.		Data
Working Life	> 50 million for ref(depends on working conditions)		Operating Temperature		-30C°-80C°
Rated Speed	300MRP(can be customized )		Working Humidity		0-85%RH
Contact Material	Precious Metal (can be customized )		Mechanical Vibration		MIL-SID-810E
Shell Material	Aluminum Alloy (surface hard oxidation treatment)		IP Grade		IP51( IP65、IP68 Optional)
Rotational Torque	0.1N.M;+0.03N.M/ channel

DRAWING

标准图纸

*If no standard models are suitable, contact us for custom solutions directly, thanks.

Standard Model List

常规产品选型表

Conventional product selection table
JSR-MPS12XX Multi-channel Pneumatic Slip Ring Table
Model	Passage(gas)	Port Size	Pipe Size	Power Circuits(10A)	Signal Circuits(5A)
MPS12XX-6P10	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	6	0
MPS12XX-6S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	0	6
MPS12XX-P1210	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	12	0
MPS12XX-6P10-6S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	6	6
MPS12XX-12S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	0	12
MPS12XX-18P10	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	18	0
MPS12XX-6P10-12S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	6	12
MPS12XX-P1210-6S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	12	6
MPS12XX-18S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	0	18
MPS12XX-S24	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	0	24
MPS12XX-6P10-18S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	6	18
MPS12XX-30S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	0	30
MPS12XX-36S	12	M5、G1/8"、G1/4"、G3/8"、G1/2" Optional	4MM、6MM、8MM、10MM、12MM、14MM Optional	0	36
Note: N pieces of 5A current loops can be used as 1 channel of N5A current loop; For example, 2 rings 5A can be used as 1 circuit 10A.If no standard models are suitable, contact us for custom solutions directly, thanks.

Color Code of Lead Wire

各环路导线色码表

Ring No.	Color	Ring No.	Color
1	Black	7	Purple
2	Red	8	Grey
3	Yellow	9	Orange
4	Green	10	Brown
5	Blue	11	transparent
6	White	12	Light Green
(Note: 12 colors are a group, with serial numbers 1...12, the next group repeats the first 12 colors, and each group is identified by a number tube as the group serial number.)

OPTIONAL

Optional项

Note: The following special requirements can be customized, the delivery time will increase by 3~15 days, and the cost will increase by 5%~50%. Most of the basic accessories of our company are standardized and modularized, and non-standard customization can also greatly reduce price and delivery.

The outgoing method and outgoing length of the rotor and stator can be customized.
Due to structural limitations, it can be customized according to the specified length or height, or outer diameter.
It can support up to 200 channels of power current or signal.
Optional aviation plug, terminal, and heat shrink tube.
Yaskawa, Panasonic, Siemens, and other servo system signal, power line, and encoder line hybrid slip ring.
Can mix high-speed data transmission (including Ethernet, USB, Profibus, ProfiNET, EtherCAT, CANopen, CANBUS, CC-LINK, RS232, RS485, and other industrial buses).
The temperature control signal and thermocouple signal are mixed.
Customized slip ring for special environments such as shockproof and high temperature.
It can be mixed with pneumatic and hydraulic rotary joints to form a gas-electric-hydraulic slip ring.
The low/high frequency and connector types can be customized.
The High-frequency power can be customized.
The number of channels can be customized according to requirements.
The maximum current can reach 5000 amperes (A).
Military level.
Waterproof, underwater mode optional, IP65, IP68 optional.
Requirements for stainless steel housing.

Applied Projects

适用项目

Non-standard automation equipment

The definition of non-standard automation equipment is user-customized, user-only, non-market-circulated automation system integration equipment, which is assembled by unit equipment manufactured in accordance with the unified industry standards and specifications recognized by the state and is based on the needs of customers. Develop, design, and manufacture equipment. At present, most of the equipment is inseparable from the requirements of gas and electricity, so the Multi-channels Pneumatic Slip Ring was born in response to the needs of the industry. The Multi-channels Pneumatic Slip Ring can ensure that the equipment rotates 360 degrees while transmitting all media such as air/gas, current, and signal, and all core components. The gas-electric slip rings produced by JARCH Electromechanical are widely used in non-standard automation equipment and have been recognized by many equipment manufacturers and customers.

非标自动化设备

Gas-electric rotary platform(Pneumatic rotary platform)

The gas-electric rotating platform is used by many automation equipments, which greatly reduces the size of the equipment and reduces the cost of the equipment. The reason why the gas-electric rotary table can perform various actions while continuously rotating is because of the support of gas-electric slip rings, which can ensure that the equipment can transmit various control signals and workbenches while rotating uninterruptedly. Air pressure is required for rotation. JARCH Electromechanical has specialized in R&D and production of gas-electric slip rings for 16 years. The gas-electric slip rings produced by the company are widely sold in more than 100 countries overseas and have been recognized by many new and old customers, JARCH Electromechanical welcomes new and old customers to visit the factory for guidance.

Automated production line

An automated production line refers to a form of production organization in which the production process is realized by an automated machine system. It is formed on the basis of the further development of the continuous assembly line. The modern automated production line is the pinnacle of human beings entering the era of gas and electricity. The development of automated production lines has also promoted the development of the conductive slip ring industry. In response to the needs of equipment, a series of hybrid slip rings such as gas-electric slip rings, electro-hydraulic slip rings, and electro-optic slip rings have emerged, especially gas-electric slip rings. It has become an indispensable part of the automated production line. The gas-electric slip ring can solve the winding problem caused by the rotating work of the equipment, greatly improve the work efficiency of the production line, and avoid the possibility that the production line will be stopped due to the winding of the equipment.

自动化产线

Message consultation

Product

JSR-MPS12 Multi-channel Pneumatic Slip Ring

name

tel

email

Submit on-line

JSR-MPS12 Multi-channel Pneumatic Slip Ring

Model Ordering Instructions

Technical Specifications

DRAWING

Standard Model List

Color Code of Lead Wire

OPTIONAL

Applied Projects

Non-standard automation equipment

Gas-electric rotary platform(Pneumatic rotary platform)

Automated production line

Message consultation

New HD High Frequency Video Combination Slip Ring Solution!!!Why does High-end Equipment Use Fiber Optic Slip Rings Instead of Standard Slip Rings? How Wide the Application Range of Mercury Slip Rings,Do You Know it?

How to solve the problem of smoke when the conductive slip ring is in use?---The importance of using fiber brush technology for conductive slip ring,and do you know the Wind power slip ring?

How to Choose the Model of the Slip Ring You Need? The Installation Method of the Rotating Slip Ring--Shaft or Flange?

The difference between the old carbon brush slip ring and the new brush slip ring, what are the media transmitted by the slip ring?

Message prompts