JSR-MPV02 Multi-channel Pneumatic Slip Ring
Professional slip ring manufacturer
Product introduction: JSR-MPV02 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 3-in 3-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPV03 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.
型号定购说明
技术规格参数
Technical Specifications | |||||
Rotary Joint Technical Parameters | |||||
Spec. | Data | Spec. | Data | ||
Passages(Gas) | 2-in,2-out | Pipe Size | Can be customized according to demand | ||
Port Size | M5、G1/8''、G1/4''、G3/8''、G1/2'' Optional | Max. Operating Pressure | Positive Pressure 1Mpa(can be customized high pressure) , Vacuum - 0.01torr | ||
Electrical Technical Parameters | |||||
Power | Signal | ||||
Spec. | Data | Spec. | Data | ||
Voltage range | 0-440VAC/VDC | Voltage range | 0-440VAC/VDC | ||
Insulation Resistance | ≥1000MΩ/500VDC | Insulation Resistance | ≥1000MΩ/500VDC | ||
Lead wire spec. | AWG16# Tinned Teflon | Lead wire spec. | AWG22# Tinned Teflon | ||
Rated current | Optional current for each channel | ||||
Electrical noise | 10mΩ@6VDC,50mA,5Rpm | ||||
Dynamic resistance change | <0.01Ω | ||||
Mechanical Data | |||||
Mechanical Performance | Environmental Performance | ||||
Spec. | Data | Spec. | Data | ||
Working Life | > 50 million for ref(depends on working conditions) | Operating Temperature | -30C°-80C° | ||
Rated Speed | 300MRP(can be customized ) | Working Humidity | 0-85%RH | ||
Contact Material | Precious Metal (can be customized ) | Mechanical Vibration | MIL-SID-810E | ||
Shell Material | Aluminum Alloy (surface hard oxidation treatment) | IP Grade | IP51( IP65、IP68 Optional) | ||
Rotational Torque | 0.1N.M;+0.03N.M/ channel |
标准图纸
*If no standard models are suitable, contact us for custom solutions directly, thanks.
常规产品选型表
Conventional product selection table | |||||
JSR-MPS02XX Multi-channel Pneumatic Slip Ring Table | |||||
Model | Passage(gas) | Port Size( Optional) | Pipe Size( Optional) | Power Circuits(10A) | Signal Circuits(5A) |
MPV02XX-6P10 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 6 | 0 |
MPV02XX-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 0 | 6 |
MPV02XX-P1210 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 12 | 0 |
MPV02XX-6P10-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 6 | 6 |
MPV02XX-12S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 0 | 12 |
MPV02XX-18P10 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 18 | 0 |
MPV02XX-6P10-12S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 6 | 12 |
MPV02XX-P1210-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 12 | 6 |
MPV02XX-18S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 0 | 18 |
MPV02XX-S24 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 0 | 24 |
MPV02XX-6P10-18S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 6 | 18 |
MPV02XX-30S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 0 | 30 |
MPV02XX-36S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" | 4mm、6mm、8mm、10mm、12mm、14mm | 0 | 36 |
Note: N pieces of 5A current loops can be used as 1 channel of N*5A current loop; For example, 2 rings 5A can be used as 1 circuit 10A.*If no standard models are suitable, contact us for custom solutions directly, thanks. |
各环路导线色码表
Ring No. | Color | Ring No. | Color |
1 | Black | 7 | Purple |
2 | Red | 8 | Grey |
3 | Yellow | 9 | Orange |
4 | Green | 10 | Brown |
5 | Blue | 11 | transparent |
6 | White | 12 | Light Green |
(Note: 12 colors are a group, with serial numbers 1...12, the next group repeats the first 12 colors, and each group is identified by a number tube as the group serial number.) |
可选项
Note: The following special requirements can be customized, the delivery time will increase by 3~15 days, and the cost will increase by 5%~50%. Most of the basic accessories of our company are standardized and modularized, and non-standard customization can also greatly reduce price and delivery.
The outgoing method and outgoing length of the rotor and stator can be customized.
Due to structural limitations, it can be customized according to the specified length or height, or outer diameter.
It can support up to 200 channels of power current or signal.
Optional aviation plug, terminal, and heat shrink tube.
Yaskawa, Panasonic, Siemens, and other servo system signal, power line, and encoder line hybrid slip ring.
Can mix high-speed data transmission (including Ethernet, USB, Profibus, ProfiNET, EtherCAT, CANopen, CANBUS, CC-LINK, RS232, RS485, and other industrial buses).
The temperature control signal and thermocouple signal are mixed.
Customized slip ring for special environments such as shockproof and high temperature.
It can be mixed with pneumatic and hydraulic rotary joints to form a gas-electric-hydraulic slip ring.
The low/high frequency and connector types can be customized.
The High-frequency power can be customized.
The number of channels can be customized according to requirements.
The maximum current can reach 5000 amperes (A).
Military level.
Waterproof, underwater mode optional, IP65, IP68 optional.
Requirements for stainless steel housing.
适用项目
The definition of non-standard automation equipment is user-customized, user-only, non-market-circulated automation system integration equipment, which is assembled by unit equipment manufactured in accordance with the unified industry standards and specifications recognized by the state and is based on the needs of customers. Develop, design, and manufacture equipment. At present, most of the equipment is inseparable from the requirements of gas and electricity, so the Multi-channels Pneumatic Slip Ring was born in response to the needs of the industry. The Multi-channels Pneumatic Slip Ring can ensure that the equipment rotates 360 degrees while transmitting all media such as air/gas, current, and signal, and all core components. The gas-electric slip rings produced by JARCH Electromechanical are widely used in non-standard automation equipment and have been recognized by many equipment manufacturers and customers.
The gas-electric rotating platform is used by many automation equipments, which greatly reduces the size of the equipment and reduces the cost of the equipment. The reason why the gas-electric rotary table can perform various actions while continuously rotating is because of the support of gas-electric slip rings, which can ensure that the equipment can transmit various control signals and workbenches while rotating uninterruptedly. Air pressure is required for rotation. JARCH Electromechanical has specialized in R&D and production of gas-electric slip rings for 16 years. The gas-electric slip rings produced by the company are widely sold in more than 100 countries overseas and have been recognized by many new and old customers, JARCH Electromechanical welcomes new and old customers to visit the factory for guidance.
An automated production line refers to a form of production organization in which the production process is realized by an automated machine system. It is formed on the basis of the further development of the continuous assembly line. The modern automated production line is the pinnacle of human beings entering the era of gas and electricity. The development of automated production lines has also promoted the development of the conductive slip ring industry. In response to the needs of equipment, a series of hybrid slip rings such as gas-electric slip rings, electro-hydraulic slip rings, and electro-optic slip rings have emerged, especially gas-electric slip rings. It has become an indispensable part of the automated production line. The gas-electric slip ring can solve the winding problem caused by the rotating work of the equipment, greatly improve the work efficiency of the production line, and avoid the possibility that the production line will be stopped due to the winding of the equipment.
product
news